How Much Should an HVAC Company Charge Per Hour? A CPA's Answer for Michigan Shops in 2026

The short answer: it's a number you calculate from your own costs, not one you look up. For a typical three-truck West Michigan service shop, the math below lands at about $138 per billed tech-hour.

Most HVAC owners set their hourly rate one of two ways: they find out what the shop across town charges and come in a little under, or they take last year's rate and add a few dollars. Both feel reasonable, and both can quietly lose money for years. Your competitor's rate tells you about your competitor's costs, not yours. Last year's rate was set before the wage increase, the new van payment and the insurance renewal.

The rate that keeps an HVAC business healthy comes from four numbers you already have.

It takes about ten minutes the first time and five minutes every time a cost changes.

The four inputs

  1. What you pay a tech per hour, before taxes.
  2. What a paid hour really costs you, once payroll taxes, workers' comp and benefits are added. Call it the loaded wage.
  3. How many of the hours you pay for actually get billed, which in most service shops is far fewer than owners think.
  4. Your monthly overhead: trucks, fuel, insurance, shop, office, software, dispatch, and the owner's own pay. Everything except tech wages and parts.

With those, the rate is three divisions and one markup.

Step 1: the loaded wage

A tech on $32 an hour doesn't cost you $32. Employer payroll taxes run about 7.65% for Social Security and Medicare plus federal and Michigan unemployment, workers' comp for HVAC work is several percent more, and any health contribution, retirement match, paid time off and uniforms sit on top. For most Michigan shops that adds 20% to 30% to the wage. The Profit Check uses 25% as its default, so $32 becomes $40 an hour.

If you pay more than $32, every number below scales up with it. If you're paying $28 and wondering why you can't keep techs, that's a different article.

Step 2: billable hours, the number that surprises everyone

You pay a tech for 40 hours. He bills maybe 26. The rest is driving between calls, picking up parts, the morning meeting, the callback you couldn't charge for, training, the slow Tuesday in October. That's not a performance problem; it's the shape of service work. Shops that measure it carefully usually land between 55% and 75% of paid hours billed, and the Profit Check assumes 65%.

This is the step most rate calculations skip, and it's the biggest one. At 65% billable, the $40 loaded wage has to be recovered across 0.65 of an hour, so the labor cost per billed hour is $40 / 0.65 = $61.54.

If you think your shop bills closer to 80%, measure it for a month before you believe it. Most owners who do find they were at 60%.

Step 3: overhead per billed hour

Add up every monthly cost that isn't a tech wage or a part: van payments and fuel, liability and vehicle insurance, the shop lease, the office person, dispatch and invoicing software, phones, marketing, the accountant, and the owner's salary. For a three-truck shop in West Michigan that number is commonly somewhere around $15,000 to $22,000 a month; the example here uses $18,000.

Then count billed hours per month across all trucks. Three techs each billing 25 hours a week is 75 hours a week, or about 325 a month (75 × 4.33). Overhead per billed hour is $18,000 / 325 = $55.38.

That's the number that explains why a one-truck owner-operator can charge $95 and a three-truck shop can't: the shop is carrying an office, a dispatcher and an owner who no longer turns wrenches, and every billed hour has to pay for them.

Step 4: profit

Labor and overhead per billed hour come to $61.54 + $55.38 = $116.92. Charging that number means the business breaks even and the owner's reward for the risk is zero. Healthy HVAC shops in our benchmark data run a net profit of 12% to 15% of revenue before the owner's income taxes, and the top quartile clears 13%. Using the Profit Check's default 15% target, the rate is $116.92 / (1 − 0.15) = $137.55 per billed tech-hour.

Not $116.92 plus 15%. Dividing by 0.85 is what makes profit 15% of the rate; adding 15% on top of cost gives you 13%, and that two-point gap is a real number across a year of billed hours.

The worked example in one place

LineExample shop
Tech wage$32.00 /hr
Payroll extras (25%)$8.00
Loaded wage$40.00 /hr
Billable efficiency65%
Labor cost per billed hour$61.54
Monthly overhead$18,000
Billed hours per month (3 trucks × 25 hrs × 4.33)325
Overhead per billed hour$55.38
Cost per billed hour$116.92
Profit target15%
Rate per billed tech-hour$137.55

If your price book is built on $115 an hour, this shop is giving away about $22 on every billed hour, which across 3,900 billed hours a year is roughly $88,000 of profit that never showed up. That's the "pricing gap" the Profit Check reports in real dollars when you enter your current rate.

What this means if you use flat-rate pricing

Flat-rate books don't remove the hourly rate; they hide it. Every task price in the book is some number of labor hours times a rate, plus parts. If the rate under the book is $115 and your costs say $138, every task is underpriced by the same 16%, and the fix is to rebuild the book on the new rate, not to nudge a few popular tasks. Most flat-rate software lets you change the base labor rate in one place.

Read this before you raise your prices

A higher rate is the right answer more often than not, but check three things first, because sometimes the number is telling you something else.

  • Is billable efficiency the real problem? Moving from 60% to 70% billable drops the labor cost per billed hour from $66.67 to $57.14 on the same $40 wage. Tighter dispatch, parts stocked on the truck and fewer unpaid callbacks can be worth more than a rate increase, and customers never see it.
  • Are you blending service and install? Install crews bill more hours per day at a lower loaded cost; service techs bill fewer at a higher one. A single blended rate overprices installs and underprices service. Run the math separately for each.
  • Do maintenance agreements change the overhead picture? Recurring membership revenue covers part of the fixed overhead before a single call is billed. If 20% of your revenue is recurring, the overhead that the hourly rate has to recover is smaller, and the rate can be too.

And if the math says $138 and you've been charging $95, don't jump there in a week. Move in two or three steps, explain nothing to customers beyond "our rates are updated for 2026," and watch close rates. Almost every shop that does this finds the customers who leave over price were the ones costing money anyway.

Frequently asked questions

Does the overhead number include the owner's salary?

Yes, and it should. If you're paying yourself nothing, the rate looks fine and the business is actually losing money. Put a market salary for the job you do in overhead, and keep profit separate.

What about a crew rate for installs?

Same method, with the crew's combined loaded wage and the crew's billed hours. Two techs at $40 and $30 loaded, billing 32 hours a week each at 80% efficiency on installs, come out well below the service rate per tech-hour, which is why blending them with service is a mistake.

How often should I recalculate?

Any time a cost moves: a wage increase, a new van, an insurance renewal, a new hire in the office. At minimum, every January. The Profit Check takes two minutes, so there's no reason not to.

Is $138 an hour realistic in Michigan?

It's the rate the example shop's costs require; whether the market accepts it depends on your area, your reputation and how you present it. Shops that have measured their numbers tend to find their rate was below the market, not above it.

Start with the Profit Check

In about four minutes it gives you the rate per billed hour your costs require, your pricing gap in real dollars, a benchmark score out of 100, and a slow-season cash reserve target. It's free, and it's the same math we use with clients.